|
|
|
| |
|
|
|
Master Roll - Rulli master |
|
| INTERCHANGEABLE STRIP CYLINDRICAL BRUSHES
The “MASTER” roll cylindrical brushes are provided by assembling helical segments, in order to emphasize the brushing unit that the strip brush is about.
The roller is manufactured along with a steel body, bearing turned disks. On these disks the strip brushes are tightly assembled with screw-in wedges (the “MASTER” roll cylindrical brush is open, dis. 7). Either way, the roller can be supplied with a mounted tube that bears strip welded sheathings (the “MASTER” roll cylindrical brush is closed, dis. 8). The helical segments assembly provides a constant cleanliness and carries away the slugs.
The gap among the brushing segments assures a complete slugs dropping and avoids any clogging during the session, which will be kept high and outstanding. |  | RMAP-RMAL OPEN MASTER ROLL'S MANUFACTURING FEATURES | | | E | LU | A | A | MAX RPM | STRIP | FILL-MATERIAL | | Min | Max | Standard | Min | Max | RMAP RMAL | 159 80 | 200 200 | 3000 2000 | 300 200 | 270 180 | 450 400 | 8 m/s | N° 8STRIP B.14 N° 8 STRIP B.10 | TUTTI-ALL |
| 
| LEGENDA | A= Brush diameter LU= Useful length LT= total length D= Brush bearing tube diameter | E= Disks bearing strip diameter T1 T2= Tube ends S= Tapering with key-way seating B= tapering diameter N= Feather key seating |
| Different types of fill materials can be assembled onto roll brushes, according to different purposes: the wires can be metal, vegetal fiber, synthetic and mixed materials made. The roll brushes can be easily dismantled and replaced without disassembling the shaft. When the “MASTER” roll cylindrical brush is open, it will be sufficient to release the wedges screws and pull the strip brushes out either sideways or radialways. When the “MASTER” roller cylindrical strip brush is closed, it will be sufficient to pull the strip brushes out sideways. According to the final purpose of the application, by the type of surface to be cleaned and the type of material to be carried out, the “MASTER” will properly respond to the end user’s needs and requirements.
| RMC CLOSED MASTER ROLL'S MANUFACTURING FEATURES | LU/LT | A | D | NUMBER STRIP | MAX RPM | FILL-MATERIAL | Min | Max | Min | Max | Min | Max | | 200 | 3000 | 100 | 800 | 42 | 159 | A richiesta ed in base al diam. del tubo. On request and in accordance with the tube's diam. | 8 m/s | TUTTI - ALL |
| | | LEGENDA | A= Brush diameter LU= Useful length LT= total length D= Brush bearing tube diameter | D1= Bore diameter T1 T2= Tube ends N= Feather key seating |
|
|
|
|
|
|
|
|
|
|
